• Components
  • Bluetron™ EVK BTR000
  • Bluetron^™ BTR170
  • Bluetron^™ BTR410
  • Bluetron^™ BTR310
  • Bluetron^™ BTR200
  • Bluetron^™ BTR300S
  • Bluetron^™ BTR50x
  • Bluetron^™ BTR601
• ODM

Bluetron^™ Application Specific Module BTR601

The Bluetron™ BTR601 module from AvantWave is a complete Bluetooth^® solution for fast implementation, cutting your time-to-market. It is a short-range, compact and cost effective radio/baseband module that can be implemented in any kind of electronic devices, such as hands-free car kit, PDA and mobile phone handset etc.

In standard configuration the module includes a baseband processor with on board 4M ROM memory, a radio front-end, supporting circuitry, able to connect with some higher-levels external software protocols and such as HSP, HFP, A2DP, AVRCP are coexisted with the external Host MUC.

The Bluetron™ BTR601 module is a power class 2 Bluetooth^® device, and is in compliance with version 2.1 +EDR of the Bluetooth^® specification. It is supplied with Bluetron™ HCI stack firmware which runs on the internal microprocessor. Bluetron™ BTR601 module is built on CSR BC06 QFN ROM memory for firmware and application software storage.

Key Features

• A small and cost effective Bluetooth^® System
• Bluetooth^® specification v2.1 +EDR compliant
• Class 2, up to 10-meter range
• Complete 2.4GHz Bluetooth^® System including:
  - Hardware: Radio, Baseband, Crystal, MCU, Regulators & ROM
  - Standard Firmware: HCI stack
• Integrated 1.8V, 1.5V regulators (linear mode)
• Compact size: 32.0 mm x 15.0 mm x 2.85 mm (with shield can)
• SDIO (Bluetooth^® type A) & UART @4Mbps interfaces
• Auristream Codec (16, 24, 32, 40kbps), transmit power is minimized
• Built-in PCM or I²S interfaces
• Surface mount module for embedded applications
• Chip Antenna on board or External antenna design
• On board shield can
• IEEE 802.11 coexistence
• Green (RoHS & Halogen free
• Operating & Storage temperature within -40^oC to +85^oC

Applications

• Embedded system with host MCU

Technical Data

• Bluetooth^® Class 2 radio (up to 10 meters)
• Uses 2.4 GHz ISM band
• Based on CSR BC06 QFN ROM chipset
• Interface with Host MCU with SDIO (Bluetooth^® type A) & UART @4Mbps interfaces
• Single supply voltage
• Operating temperature: -40^oC to +85^oC
• Reference designs and antennas available for several architectures
  

• Headset, Hands-free firmware available
• Possible to use customized firmware

• Bluetooth^® version 2.1 +EDR
  

• Bluetron™ On-board Installation Kit (Firmware and parameters installation)
  

Configuration

BTR601 is based on the scalable Bluetron™ architecture. The lower layers of the Bluetooth^® stack (HCI) runs on-package. An external microcontroller is required. Bluetron™ BTR601 is integrated with a digital ADPCM low power CODEC, and interface to power management circuit.

Antenna Interface

Communication is carried out using a wide range of external interfaces like SDIO (Bluetron™ type A) & UART @4Mbps interfaces, high-speed UART, .


Software

A variety of Bluetooth^® stacks for host- and embedded applications with different configurations could be offered. Please contact with our sales representatives at inquiry@avantwave.com or call us directly at 852-2648-9887.

Casira and Bluelab are trademarks of CSR
Bluetooth^® is trademark of Bluetooth^® SIG, Inc., USA