Bluetron™ Application Specific Module
BTR300S

The Bluetron™ BTR300S module from AvantWave is a complete Bluetooth® solution for fast implementation, cutting your time-to-market. It is a short-range, compact and cost effective radio/baseband module that can be implemented in any kind of electronic devices, such as cell phones, PDAs and digital cameras.

In standard configuration the module includes a baseband processor with on board 4Mbit ROM memory, a radio front-end, antenna interface, supporting circuitry, together with Bluetooth® HCI protocol stack.

The Bluetron™ BTR300S module module is a power class 2 Bluetooth® devices, and is in compliance with version 2.0 + EDR of the Bluetooth® specification. It is supplied with Bluetooth® protocol stack firmware which runs on the internal microprocessor. Bluetron™ BTR300S module is built on CSR BC04 ROM EDR core with an 4Mbit integral ROM memory for firmware and application software storage.

Key Features

• A small and cost effective Bluetooth® System with integrated antenna
• Bluetooth® specification v2.0 + EDR compliant
• Supports eSCO and AFH
• Class 2, up to 10-meter range
• Complete 2.4GHz Bluetooth® System including:
  - Hardware: Antenna, Radio, Baseband, E2PROM, and 1.8V Linear Voltage Regulator
  - Standard Firmware: HCI (UART or USB)
• Power management: low power 1.8V operation for Bluetooth® core
• Compact size: 11 mm x 11 mm x 2.15 mm
• Support scatternet
• Surface mount module for embedded applications
• Full speed USB V2.0 interface supports UHCI and OHCI host interfaces
• UART interface with programmable baud rates up to 3Mbps
• Audio PCM interface for audio applications
• RoHS Compliance
• Several firmware options
• Custom firmware production available

• Mobile Phones
• Smart Phones
• PDAs and other portable terminals
• Printers
• Digital Cameras
• Home Entertainment

Technical Data

• Bluetooth® Class 2 radio (up to 10 meters)
• Nominal output power 0.5 dBm
• Nominal sensitivity -79 dBm
• Uses 2.4 GHz ISM band
• Based on CSR BC04 ROM EDR chipset
• Host processor interface with UART, USB
• Supply voltage: 3.3V and 1.8V DC
• Power consumption:
  - Link active: 25 mA (Min.), 35 mA (Max.)
  - SCO connection HV3 in sniff mode: 17 mA
  - Link active in park mode: 0.18 mA
  - Idle with Deep Sleep mode: 0.85 mA
• Size: 11 mm (W) x 11 mm (L) x 2.15 mm (T)
• Operating temperature: -20^oC to +70^oC
• Reference designs available for several architectures
  

• Headset, Hands-free firmware available
• Possible to use a customized firmware

• Bluetooth® version 2.0 + EDR

• Bluetron™ On-board Installation Kit (Firmware and parameters installation)

Please contact with our sales representatives at sales@avantwave.com or call us directly at 852-2648-9887.

Bluetooth is trademark of Bluetooth SIG, Inc., USA