Bluetron™ Application Specific Module
BTR110C(discont.)

The Bluetron™ BTR110C module from AvantWave is a complete Bluetooth® solution for fast implementation, cutting your time-to-market. It is a short-range, compact and cost effective radio/baseband module that can be implemented in any kind of electronic devices, such as hands-free car kit, portable hands-free application, etc.

In standard configuration the module includes a baseband processor with on board 8Mbit Flash memory, a radio front-end, antenna interface, supporting circuitry, together with some higher-level software protocols and applications such as L2CAP, SDP, SPP, HSP and HFP are resided in the Flash.

The Bluetron™ BTR110C module is a power class 2 Bluetooth® devices, and is in compliance with version 1.1/1.2 of the BluetoothR specification. It is supplied with Bluetooth® protocol stack firmware which runs on the internal microprocessor. Bluetron™ BTR110C module is built on CSR BC02 External core with an 8Mbit Flash memory for firmware and application software storage.

Key Features

• A small and cost effective Bluetooth® System
• Bluetooth® specification v1.1/v1.2 compliant
• Class 2, up to 10-meter range
• Complete 2.4GHz Bluetooth® System including:
  - Hardware: Radio, Baseband and Crystal & Memory
  - Standard Firmware: HCI and RFCOMM stack
• Power management: low power 1.8V operation for Bluetooth® core
• Compact size: 24.5 mm x 15 mm x 2.8 mm
• External antenna
• Support multiple connections
• UART or I2C interface interfaced with echo-cancellation circuit
• Surface mount module for embedded applications
• Several firmware options
• Rewritable flash memory for easy upgrade route
• Custom firmware production available

• Automotive hands-free kit applications
• Car radio systems
• Cable replacement between BluetoothR enabled devices
• Point-of-sales (POS) systems
• Telemetry and machine-to-machine devices
• Fitness and sports telemetry devices
• Industrial PCs and laptops
• RS232 cable replacers

Technical Data

• Bluetooth® Class 2 radio (up to 10 meters)
• Nominal output power 0.5 dBm
• Nominal sensitivity –78 dBm
• Uses 2.4 GHz ISM band
• Based on CSR BC02 Flash chipset
• Host processor interface with UART, USB
• SPI interface for firmware and parameter upgrades
• Supply voltage: 3.3V and 1.8V DC
• Power consumption:
  - Link active: 25 mA (Min.), 35 mA (Max.)
  - Link active in sniff mode: 28 mA
  - Link active in park mode: 0.60 mA
  - Idle with Deep Sleep mode: 0.15 mA
• Size: 15 mm(W) x 24.5 mm(L) x 2.8 mm (T)
• Operating temperature: -20oC to +75oC
• Metal shielding for avoiding RF interference
• Reference designs and antennas available for several architectures
  

• Headset, Hands-free firmware available
• Possible to use a customized firmware

• Bluetooth® version 1.1/1.2

• Bluetron™ On-board Installation Kit (Firmware and parameters installation)

Configuration

The BTR110C is based on the scalable Bluetron™ architecture. This configuration allows embedded stand-alone Bluetooth® applications where your target application is embedded within the module, in addition to traditional host-based applications. This possibility is especially useful in after market car kit applications. The variety of external interfaces also makes the BTR110C ideally suited for embedded applications in automotive car kit, car radio and mobile computing environments.

Antenna Interface

50Ω Bluetooth ISM Band antenna (2.4-2.5 GHz)


Communication Interface

Communication is carried out using a wide range of external interfaces like high-speed UART, SPI, USB (Universal Serial Bus), PCM and PIO.


Software

The standard software includes Bluetooth protocol layers up to the HCI-layer or RFCOMM layer.

In addition, a variety of Bluetooth stacks for host- and embedded applications with different configuration could be offered. Please contact with our sales representatives at sales@avantwave.com or call us directly at 852-2648-9887.

Bluetooth is trademark of Bluetooth SIG, Inc., USA